DIN Rail Mount Power Supply - WV905 The WV905 power supply can be used to operate most 24VDC instruments, including Action's Ultra SlimPak II, Ultra SlimPak, and ActionI/Q models. The WV905 will operate on input voltages ranging from 85 to 265VAC or 120 to 300VDC. The 24VDC, 0.5A output has overcurrent shutdown with automatic restart and thermal shutdown. The input is proteccted by fuse, a thermistor for inrush current protection, and a varistor for over voltage. The WV905 is the perfect power source for Ultra SlimPak II signal conditioners and alarm units. The integrated power jumping system makes short work of connecting power, eliminating the need to "daisychain" power wires. * Module configuration summary * Module configuration editing * E-mail setup, editing & address book All memory to support the signal conditioner's historical data is battery backed. The web pages and all email messages are stored in non-volatile memory. Overcurrent Shutdown with automatic restart TECHNICAL SPECIFICATION (WV905) Typical: 115 to 239VAC, 10%, 50/60Hz Fuse: 2A slowblow (internal) Inrush Current: Thermistor Over current shutdown with automatic restart plus thermal shutdown Maximum Load Capacitance on Output (full output current after loss of input) -20 C to +50 C (-4 F to 122 F) -40 C to +85 C (-40 F to 185 F) 20% to 90% RHNC @ 60 C for 24 hours DIN rail case refer to Dimensions drawing http:// /products/signal-conditioning/action/ultra-slimpakii/wv9I'M (New power supply ultra slimpak ii eurotherm was posted and is owned by: Dorthy Lott) |
Dlott@chicagopartsnetwork.com (Dorthy Lott)
for more information.