|
The AC 100 uses spring force for part clamping, and air pressure for release. It will retain full part clamping even if air pressure is removed. The AC 100 provides a 1 1/8" (28.24 mm) diameter thru-hole, and collets are easily tightened from the rear. It provides up to 10,000 lb of draw-tube force, with .025" travel and can be used for drilling and milling in most applications. The .025" travel allows for a part diameter variation of .006" without the need to readjust the collet. Due to its long rearward length, the AC 100 cannot be used vertically, and is not recommended for tilting HA5Cs. Also, some consideration must be given to clearances when using the AC 100 parallel to the Y-axis, as its length may collide with the Z-axis waycover. Your satisfaction is assured. You have 20-days to return or exchange the unopened item. All returns are subject to a 15% restocking fee. This fee will be deducted from the refunded amount. All returns are to be sent 'freight prepaid'. Returns will not be accepted without a 'Returned Merchandise Authorization Number'. Obtain this number by contacting us direct. This item is backed by a 12-month limited manufacturer's warranty. More information is available through the manufacturer: Haas Automation, Inc. Questions? Click "Contact Seller" or email: mamieguerra@chicagopartsnetwork.com (Haas rotary ac-100 air collet closer for 5C indexer was posted and is owned by: Mamie Guerra) |
mamieguerra@chicagopartsnetwork.com (Mamie Guerra) for more information.