|
Like New! Still in Original Box! Programmed once! FREE Upgraded Software & FREE Frequency Guide. No Scratches. Great Condition. Owners Manual not included but available online! Includes: Cigarette lighter power supply; wall power supply; car hardwire; antenna; PC Cable; Mounting Brackets * Sites: 1000 maximum, 256 maximum per system * Scan Rate: 100 channels per second (conventional mode) * System Quick Key range: 0-99 * Preprogrammed Service Search Bands: 13 * APCO25 Digital Audio decoding * Adaptive Digital Threshold - Automatically sets the digital decode threshold for APCO 25 systems * TrunkTracker IV with Control-Channel Only scanning and I-Call monitoring * Close Call, with Close Call Do Not Disturb, Close Call Priority (or Primary), and Close Call Temporary Store. * Frequency/ID AutoStore - automatically store frequencies from a service or limit search into a conventional system or store talk group IDs into a trunked system * 16 character text tagging for each system, site, group, channel, talkgroup, search range, GPS location, tone-out, and SAME group * Compatible with BC-RH96 Remote Head * Service Search — lets you select from Public Safety, News, HAM Radio, Marine, Railroad, Air, Citizens Band Radio, FRS/GMRS, Racing, TV Broadcast, FM Broadcast, Military Air, and Special (Itinerant) * Custom Search — lets you program up to 10 search ranges * 500 (250 Temporary + 250 Permanent) Search Lockouts * Priority Scan with Priority Plus * Trunking Activity Indicators * Adjustable (0-5 sec) scan delay * Adjustable Hold (scan duration 0-255 sec) per system, custom or service search * Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, and Close Call Alert. * Broadcast signal ignore while searching (TV and radio station frequencies, pagers, etc) * Quick Recall – quickly navigates to a specific Channel by choosing the System, Group, and Channel. * DIN-E and ISO Vehicle Mountable * Record Out — you can connect an output jack to a VOX controlled recorder or PC sound input to record the received audio. * Physical Dimensions: Width 7.33 Height 2.21 Depth 5.94 * Power requirements: 11.0V to 16.6V DC Uniden Multi-Site Trunking - allows independent system sites to share common talk group channel lists. Location-based scanning and GPS information display - If you connect a GPS unit to the scanner it can automatically enable/disable systems based on the geographic information you provide. Startup Configuration - Pressing a number button while powering on the scanner automatically unlocks all systems assigned to that startup key and automatically locks all systems assigned to a different startup key (unassigned systems are not affected). Temporary Lockout - Makes it easy to temporarily lock out a system, channel, or frequency. The lockout is cleared when you turn power off. Six-Level Backlighting - Lets you set the display/keypad backlight to any of three brightness levels (or off) and two colors (red or green). Also lets you connect to your vehicle’s dimmer circuit to dim the scanner’s display with the vehicle’s dimmer control. “Soft“ Search Keys - Let you program the keypad’s secondary functions to turn on/off specified search ranges. Single-Handed Function Operation - Tap Function to access F+ key presses. 5 seconds after your last key press, the scanner reverts to non F+ entry (or press Function again to revert sooner). (Uniden digital scanner w/ gps support BCD996T was posted and is owned by: Hillary Mckee) |
Hillary_Mckee@chicagopartsnetwork.com (Hillary Mckee) for more information.
