|
THESE ARE FOR BATTLEBOT OR ROBOTICS ONLY THESE ARE NOT FOR REPLACEMENT ON A POWER CHAIR This is a set of motors off a Quickie Helix power wheelchair. I have tested them and the right motor has a slight noise, a kind of klicking sound, not real loud but there. I have tested them with the controler and they are working fine other than the noise. These are the specs on the units: Made by Clifton Precision in Murphy, NC They do not have any ratings on them as for rpm or amps I have checked prices of this model number and the prices from National Powerchair Company. These gear heads and motors are expensive, $570 for the gear head and $396 for the motor, "each" not pairs. These are the reconditioned prices so I have adjusted mine accordingly... drive shaft is 2" long over all by 5/8" diameter, it has a shoulder that is apox. 1" with a 3/16" keyway, the shaft is threaded at the end with a 7/16x18 nut. each motor weighs 18 pound and 3 ounces (8.25kg) (Quickie helix power wheelchair battlebot motors was posted and is owned by: Jaclyn Abbott) |
J.Abbott@chicagopartsnetwork.com (Jaclyn Abbott) for more information.
