|
10-Bit, 250 MSPS 1.8V Analog-to-Digital Converter The AD9601 is a 10-bit monolithic sampling analog-to-digital converter optimized for high performance, low power, and ease of use. The product operates at up to a 250 MSPS conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions, including a track-and-hold (T/H) and voltage reference, are included on the chip to provide a complete signal conversion solution. The ADC requires a 1.8 V analog voltage supply and a differential clock for full performance operation. The digital outputs are CMOS compatible and support either twos complement, offset binary format, or Gray code. A data clock output is available for proper output data timing. Fabricated on an advanced CMOS process, the AD9601 is available in a 56-lead LFCSP, specified over the industrial temperature range ( 40 C to +85 C). 1. High Performance Maintains 59.4 dBFS SNR @ 250 MSPS with a 70 MHz input. 2. Low Power Consumes only 322 mW @ 250 MSPS. 3. Ease of Use CMOS output data and output clock signal allow interface to current FPGA technology. The on-chip reference and sample-and-hold provide flexibility in system design. Use of a single 1.8 V supply simplifies system power supply design. 4. Serial Port Control Standard serial port interface supports various product functions, such as data formatting, power-down, gain adjust, and output test pattern generation. 5. Pin-Compatible Family 12-bit pin-compatible family offered as the AD9626. * Wireless and wired broadband communications * Communications test equipment * Radar and satellite subsystems * Power amplifier linearization (AD9601BCP 10BIT 250 msps 1.8V a/d converter adc AD9601 was posted and is owned by: Joni Pickett) |
J-pickett@chicagopartsnetwork.com (Joni Pickett) for more information.