|
Waterborne Interior Undercoater A premium 100% acrylic waterborne undercoater created for a healthier working environment with the safety of the applicator and those in the immediate working area as a priority. Designed to be an excellent low-odor replacement for solvent-based undercoaters on properly prepared interior surfaces. Fast drying, extremely easy to sand, and non-yellowing make U2 an excellent undercoater for residential, commercial and institutional cabinet, furniture, and wood trim applications. Substrates include interior wood trim, molding, cabinets, door casings, fixtures, handrails, masonry, drywall, etc. Can be applied under most topcoats. Excellent Stain Blocking Performance Mildew Resistant & Corrosion Resistant Excellent Penetration & Adhesion VOC Compliant & Environmentally Friendly 19W03 White. Tintable up to 8 oz of universal colorant. Surface must be clean and dry. All substrates must be cleaned free of dust, dirt, loose or flaking paint, oil, grease, soap residue, wax, chalk, mildew, or other contaminants that might impede adhesion. Scuff sand slick, hard, glossy surfaces to promote adhesion. Remove mildew with a bleach and water solution and then prime. Prime knotholes and other rosin areas. Clean all chalky surfaces with a water blaster or appropriate ammoniated cleaner. DO NOT USE TSP. Refer to Surface Preparation Guide for more detailed instructions. WARNING! Removing existing coating from surface by sanding, scraping or other mechanical means may create dust or particles containing lead, a hazardous substance. Avoid creating and breathing dust and other debris. Thoroughly clean all surfaces before and after painting. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY IN CHILDREN AND PREGNANT WOMEN. If ph of masonry surfaces is greater that 8, primer with 1021 Wallz Interior/Exterior Clear Sealer Mixing: Hand stir each container thoroughly before using and occasionally while applying. No thinning usually required. If necessary, thin with up to one pint of water to each gallon of paint. Application: Apply using a high quality brush, roller or by spray. For airless application, use a 0.015-0.019 tip @ 2000 psi. Coverage: One gallon will cover approximately 450 square feet per coat on smooth surfaces. Coverage figure does not include spray loss, loss due to surface porosity, surface irregularities, nor material loss when mixing. Cleanup: Clean brushes, rollers and other equipment promptly with warm soapy water. Give spray equipment a final flush with mineral spirits to help prevent corrosion. Dispose of used paint and waste in accordance with local, state, and federal regulations. Application Precautions & Limitations: Apply when surface, air, and product are above 35 F(10 C) and at least 5 F (3 C) above the dew point. TECHNICAL DATA (Based on 19W03) 13.66 + 0.2 lb./gal. (1638g/l) Deposits a 1.75 mil (38 microns) dry. VOC: (EPA Method 24/ Material) DRYING TIME @ 77oF(25oC) & 50% RH LIMITATION OF LIABILITY: To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance, but is subject to change with prior notice. We make no guarantee of any kind, express or implied, including merchantability and fitness for particular purposes. Liability, if any, is limited to replacement of the product or refund of the purchase price. Labor, or cost of labor, and other consequential damages are hereby excluded. (Ultimate U2 undercoater mdf or wood waterbased primer was posted and is owned by: Jill Conley) |
J.Conley@chicagopartsnetwork.com (Jill Conley) for more information.
