|
Up for sale is a Rexroth Bosch Direction Control Valve Part # 0810091388. This unit is brand new, I do not have the original box for this item. Pricing on these are regularly $550 to $600, get this brand new control valve for the price! Directional control valves model WM. are direct operated spool valves. They control the start, stop and direction of fluid flow. These directional valves consist of the housing (1), an operating element (2) (roller/plunger, hand lever or rotary hand knob), control spool (3) and one or two return springs (4). In the non-engaged condition, control spool (3) is held by return springs (4) in the center, or a spring offset, position (or by a detent with rotary hand knob operation). Control spool (3) moves to the required position by means of anoperating element (2). Directional valves with rotary hand knob operation are supplied standard with detent. Hand lever operated valves are available as 2- or 3-position valves with detent. Directional valves with roller/ plunger operation are supplied without detent. When using a detented operator, the control spool is held in shifted position, so that a continuous force is not required. To limit maximum flow, orifice inserts are optionally available. Primarily, the orifice insert is intended to prevent flow rates in excess of the maximum performance data of the valve (see page 4). The insert is installed in the P port, however, will fit any of the valve ports, allowing for design flexibility. http:// /apollo/bri/Ra_22280.pdf (Rexroth bosch direction control valve part # 0810091388 was posted and is owned by: Loraine Kaufman) |
Loraine-kaufman@chicagopartsnetwork.com (Loraine Kaufman) for more information.
