Chicago Repair and Replacement Parts Network   >   By County   >   Will County   >   Motor Drives   >   Cjt solid carbide coolant fed drill tialn 7/16

Cjt solid carbide coolant fed drill tialn 7/16


Cjt solid carbide coolant fed drill tialn 7/16
* Coolant feeding S.C. Kooltwist high performance drills yield higher penetration compared to non-coolant fed high performance drills when drilling deep holes.
* 140° double split point provides excellent chip flow over the entire cutting edge.
* Tool life is increased and peck drilling can be eliminated when used with high pressure coolant.
* Larger sizes available see Style 292.
* Coating adds lubricity, enhances wear resistance and prevents edge build-up.
TiN coating is recommended for long chipping, low-carbon, ductile and gummy materials.
TiAlN coating is recommended for short chipping, abrasive and high temperature materials.
* Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
* Some tool holders and stop screws with a single, central coolant hole may require a coolant groove be added to the shank end of the drill.
(Cjt solid carbide coolant fed drill tialn 7/16 was posted and is owned by: Leticia Sutton)
Contact: l_sutton@chicagopartsnetwork.com (Leticia Sutton) (actual email hidden)
Contact l_sutton@chicagopartsnetwork.com (Leticia Sutton) for more information.

Flag any violation to moderators committee

Your flagging message:




Cjt solid carbide coolant fed drill tialn 7/16