|
OUT OF STOCK, modules are currently out of stock and it will be 2-4 weeks before stock is expected back in. PLEASE DO NOT ORDER. Prices are also going to be increased to $80 while modules are out of stock, and will be droped back down to $75 price when modules are recieved in stock. I am only leaving this listing up so watchers can still keep track of this listing, you may contact me to get an update on when the modules are expected if you would like or any other questions you may have. This message was made april 17th modules will not be in until atleast march. This listing is for one 200mw green laser module/diode as pictured above, please see specs bellow for specifics and watch the video demonstration of the module in action that you will revice, please note the case is not included it is the module only. The above beam shot pictures are from the same laser module im selling you, one is with some fog in a room, another is outside pointing at the aky, and the last one is a shot pointing at a fence aprox 70 yards away, these are not just random pictures taken from the internet these are real beam shots that you can expect to see when you recieve your laser module:) great laser very powerful lights matches burns plastics from feet away A++++++++ 200mW 532mn green laser module LAB DIY 3v (#140363848634 super fast delivery, cool product! thank You 200mw green laser diode module DIY industrial lab 532mn (#130358852420 200mw green laser diode module DIY industrial lab 532mn (#130358852420) Honest Seller, Excellent Help and Communication, Module is as Advertised!!! A++ Good laser and easy to hook up http://laserpointerforums.com/f39/jayrob-build-kits-lenses-other-stuff-listed-here-44227.html Best offer is used for bulk order pricing (2 or more modules), if you want over 10 modules please contact me before making an order. This listing is for what you see in the above pictures, the only difference is the module i will send to you will come with both the red (+) and black (-) wires plus a spring bounce (-) mounted in between the two wires. This is to give you the option to hook it up with the wires or you can remove the wires and mount this into a case the bounce would then become negative (-) and the coper cassing of the module would be positive (+), you would then be required to mount a switch onto the board to turn it on and off. Please note these modules do not come with a momentairy on/off button mounted to the board, there is an open spot on the modules board to mount a switch if you desire this all depends on how you are going to use this module. I personaly use this module all the time, it works great for pointing out stars as a whole group of people can see the star you are pointing out, it can light matches, cigaretts, pop ballons, and give you an acurate straight line. These modules are extremly powerfull and can burn/sting your skin in a matter of seconds, it can light matches in about 3 or less seconds, you can smoke black plastic from feet away and impress your friends. The link bellow is to a video demo but before you watch it please read this next section so you understand what is going on in the video at each part as the video quality is not very good. This video was recorded by my phone and was held by 1 hand as i had the laser in the other and trying to do this and have everything steady is impossible, my phone also does not pick up the beam very well at night, this video does not do this laser justice it is a must see in person and is a stunner. In the first 1 minute i show you the module you will recieve i have removed the two wires, i have soldered a switch onto the board, and you can see where the spring spring bounce is located. I also show the case i use. The next minute and 1/2 is shot outside. As you can see my phone does a better job at picking up the beam the farther it is in the sky, this beam is extremly visible and bright. The next minute is my first attempt at lighting a match with a laser, as you can see it did not go very well and i had to make adjustments as i went along. At the end of the video there is another match lighting part where i had it setup a little better and it lights them faster. And next is the black tape fusing (cutting/melting) please note there is no pressure on the black tape to help it melt appart any easier and the video speed has not been sped up this is all done in real time. I see some people showing there lasers cutting tape faster and this is either because they are pulling on the tape to help it go through it quicker/tearing it apart more than cutting it with the laser and it makes the black tape thinner and easier to cut or they have sped up the video to say 4x to make it appear to slice through it. After that there is just a little demonstration of melting some plastic on a black cd case, and at the end i show the laser melting it from apox 1ft away, there is alot of smoke produced when melting plastic but my phone does not pick this up very well. Then a small demonstration inside of the beam and the dot with the lights off, again my camera does not pick up the beam very well. There is no fog either as some people use light fog to make the laser look like its extremly brighter than it is but there tricking you. If you use fog it will extremly intensify the beam but it is not needed as the beam is already very visible. Then to wrap up the video and make up for some of my mistakes i decided to record another match lighting, some people mark there matches with a black marker and this helps attrack the light and make the match light faster. In my video i do not do this as you can see the match has not been colored and the head is red in color. You can see with a bit more steady hand and a little more experience the matches light extremly fast, this was done from a distance of about 8 inches. This is an honest video, i have not done any tricks or altered the video in any way as i dont know how to do this, im an aviation technition not a computer video editing pro. http://community.jaycut.com/mix/125314/preview Bellow is another quick video showing the laser melt through a cd case nothing fancy here just another demonstration to show you the kind of power you get. http:// /watch?v=LtXWiXtgRN0 http:// /watch?v=6jbZLlBhv6E http:// /watch?v=YYesJFSBDxM Laser Grade Industrial Grade Laser Output Power 200mW (130-180mW typical resting output) Working Temperature 20 ~ 35 ( 0 ~10 , need 30 seconds warm up in the cold ) Package 1 x A 200mW module 532nm Please note: the working temperature above, these modules by them self are not ment to be left on for long periods of time, if your going to be using it for longer than 30 second burst invenst in some heatsinks to properly cool this module or it will overheat causing pre-mature failure. Please closly monitor the temerature of the laser module when doing long burns to avoid overheating. Im not responsible for how you use this module it is up to you to properly operate this laser, if you cant afford to break it dont push it. If you have any questions about use please feel free to ask and i will let you know what you can and cant do with this module with or without proper heatsinks. Also reading some laser forums to get a better understand on high output lasers would be a good start. Please keep in mind this is an industrial high output laser this is not a toy 5 or 20mw laser pointer if you dont know what your doing please read up a little before operating this module. Please never point the laser beam toward people, animals or towards vehicles or aircraft in the sky, this is a felony!! Please wear laser-safe goggles for proper eye protection. Please keep lasers away from children-NOT A TOY. Assure to use a stable,proper, & suitable correct power supply. Always connect the power to laser to correct electrical -pole. Always obey laser's duty circle of 20 seconds on and 20 seconds off,without proper heatsinking this laser will overheat and fail. Duty cycle with heatsink is dependant upon heatsink used. Please use the laser in correct ambience condition. DPSS modules operate poorly if too cold or too hot. Working low temperature is 15 degrees C to high of 35 degrees C. Please keep laser dry and clean. Avoid wet or dusty conditions. Laser should never be dropped or bumped. Failure of laser due to improper use is not waranteed. Never look directly into the laser beam. Never point laser beam to a living organism. Do not aim the laser at reflective surfaces. Never view a laser pointer using an optical instrument. Not a toy, do not operate without safety precautions. This laser module must be attached to a heat sink if before it is powered. Failure to keep the module cool will dramatically reduce its operating lifetime and may permanently damage it. You are over 18 years of age. Never allow children to use lasers. You know the electronic safety and ESD precautions necessary with this item and therefore accept the working on arrival warranty. Electrostatic devices may be damaged in inappropriate working conditions. You are legally responsible for the use of these components, improper use of these components or their end products. You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products. VISIBLE AND/OR INVISIBLE LASER RADIATION EMITTED FROM DEVICE. AVOID EYE AND SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. (200MW green laser module diy industrial video demo~~~~ was posted and is owned by: Natalia Wallace) |
natalia_wallace@chicagopartsnetwork.com (Natalia Wallace) for more information.
