|
MILLER DYNASTY 200DX AC/DC TIG WELDER W/FC-KIT CONTRACTORS KIT WITH TORCH, REGULATOR AND HOSE, FOOT AMPERAGE CONTROL, STARTER CONSUMABLES KIT AND GROUND CLAMP WITH CABLE, ELECTRODE HOLDER AND CABLE AND CARRYING CASE. Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is NOT needed because of the advanced Squarewave arc, and extended balance control allows you to fine-tune the duration of the electrode negative p ortion of the cycle from 30 to 90%. This provides precise cleaning control and prolonged tungsten life. AC frequency control range of 20 - 250 Hz provides control for a focused arc, resulting in better directional control to help produce desired arc/weld bead characteristics. Auto-Line provides state-of-the-art flexibility by automatically connecting to 120 - 460 VAC, single- or three-phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or job site. Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010. New! Low OCV Stick is a simple design that reduces open-circuit voltage to 13 volts when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Inverter-based, AC/DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters. Lift-Arc start provides TIG arc starting without use of high frequency. Programmable HF start parameters allows the operator to independently set HF starting conditions based upon process or application. * Requires 3- or 1-Phase Power * TIG: 150 A at 16 V, 60% duty cycle * Stick: 130 A at 25.2 V, 60% duty cycle (Miller dynasty 200DX ac/dc tig welder w/fc-kit was posted and is owned by: Sofia Moses) |
S.moses@chicagopartsnetwork.com (Sofia Moses) for more information.
