|
This Fiberglass Chopper Gun has more volume control at low rpm's. Weighs only 2.5lbs. Same low air consumption. 3.0 lb. / min. Glass Fiber Output. Standard replacement parts as our standard choppers (C93-A & C93-EF) A hand held, variable speed air powered chopper gun for coating molds or parts with glass reinforcement. Continuous strand glass roving is fed into the rear of the gun. The roving is then chopped into short pieces and deposits them onto the mold. Resin is then applied by brush, roller or sprayed on using a cup gun. Variable length fibers 1/4" to 3". This gun will deposit the equivalent of one layer of 1 oz mat onto a vertical surface without fall-off before wet-out. Ideally suited to quick mold or part build-up once the first layer or two are in place. Safe and easy to operate. Has speed control for large or small output. Handheld Pneumatic Chopper Gun Perfect for both large and small jobs. Variable speed for controlling glass fiber output. Air chopper can chop from 1/4" to 3" long strands simply by adding or subtracting blades. Safe and easy to operate, these choppers are also an excellent tool for field repairs. Specs: 3.0 LB per minute output with 1" long strand. 3.5CFM @80 PSI Complete with 12 extra blades (C93-007-PK) and one extra anvil roller sleeve (C93-011) (C93-ag gear reduced air chopper was posted and is owned by: Alisa Jennings) |
A.Jennings@chicagopartsnetwork.com (Alisa Jennings) for more information.
