|
Ashland Chemical PlioBond Water Based Adhesive #5035 at only $115.00 per 5 gal pail!! INSTALLATION OF EPDM MEMBRANE BONDING ADHESIVE Bond the new sheet to the substrate by folding the sheet lengthwise on to itself so that one half of the underside is exposed. Smooth out all the wrinkles and buckles along the folded edge. Apply the bonding adhesive evenly at the rate of 120 sq. ft. per gallon on one surface using a 9" plastic core paint core paint roller or approved spray application equipment. DO NOTAllow the adhesive to dry, apply the membrane while the bonding adhesive is still wet. Roll the membrane onto the substrate taking care to avoid wrinkling by using a "wave" air motion at the leading edge to "roll" the sheet into place. Bond the adhered half of the membrane with a 18" to 24" heavy duty push broom using a pushing motion to achieve maximum contact. Pull back the unbonded half of the sheet and repeat this procedure. Do not apply adhesive to the top surface of any abutting membrane that is to be used as the seam joint. (45- 5 gal ashland latex roof roofing bonding adhesive was posted and is owned by: Lesa Baldwin) |
lesa.baldwin@chicagopartsnetwork.com (Lesa Baldwin) for more information.
