|
Standard Homebrew Kegerator Conversion Kit Enlarge Standard Homebrew Kegerator Conversion KitEnlarge Image The Standard Homebrew Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator into a home brew dispenser. All the draft beer parts are of the highest commercial grade quality which are designed and built to last. The Standard Homebrew Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator into a home brew dispenser. All the draft beer parts are of the highest commercial grade quality which are designed and built to last. The standard kit has a Pro-Line double gauge regulator upgrade over the single gauge regulator found in the economy kit. 1. Commercial Double Gauge Co2 Regulator (Built to Last!). (Large valve body, automatic vent control, checkvalve, Pressure Adjust Handle). This commercial double gauge regulator is built to last and loaded with commercial grade features! The commercial regulator works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn handle in the center is used to easily adjust the output pressure. 2. 5 Feet of 5/16" Air/Co2 Line Assembly. The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design. Reusable plastic clamps make it easier to swich out taps or for cleaning. 3. One Gas in Gray Ball Lock Connector (for Pepsi, Cornelius Kegs) with 1/4" male flare fitting that ends in a 5/16" hose barb. This Quick Disconnect Coupler is of a Ball Lock design that works with Cornlelius pepsi kegs. This connector is gray (gas) and has a male 1/4" thread for a flare fitting. This connector already has attached is a special 1/4" nut that has a 5/16" hose barb attached. The purpose of the hose barb is to match the same barb size found on your standard Co2 Regulator. The standard air line assembly will connect properly and tightly with this connector. 4. One Beverage out Black Ball Lock Connector (for Pepsi, Cornelius Kegs) with 3/16" hose barb. This Quick Disconnect Coupler is of a Ball Lock design that works with Cornlelius pepsi kegs. This connector is black (beverage) out with a a 3/16" hose barb attached. This connector connects directly to your standard 3/16" beer line. 5. 5 Feet of Homebrew Beer Line Assembly with two Plastic Clamps. 10. Standard Specialty Faucet Wrench 11. Detailed Instruction/Installation Manual. All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-(***)-710-9939. (Home brew kegerator conversion kit keg beer tap shck-nt was posted and is owned by: Belinda Levine) |
Belinda_levine@chicagopartsnetwork.com (Belinda Levine) for more information.
