Chicago Repair and Replacement Parts Network   >   By Location   >   Chicago   >   Metalworking Machine Parts   >   Icom ic-91A dual band handheld transceiver

Icom ic-91A dual band handheld transceiver


Icom ic-91A dual band handheld transceiver
Only taken out of the box to charge battery and to see if it worked - screen protector in place - pristine and unblemished. Includes ICOM 1 Year Warranty Registration Cards. Package includes radio, OEM battery, antenna, instruction manual, BC-167A desktop charger and handstrap.
Wide band receiver with dualwatch capability
The IC-91AD/A has dualwatch receiver capability,allowing you to receive two bands simultaneously (including same band). By pushing and holding the [Main/Dual] button, you can easily turn dualwatch on and off, while a press of the button allows you to toggle the active VFO channels.
Receive: 0.495 - 999.990 (VFO A); 118 - 174 and 350 - 470 (VFO B) Transmit: 144 - 148; 420 - 450
Using a large full dot-matrix LCD (37.8×20mm; 11/2×25/32 in), the IC-91AD/A clearly shows two-line frequency settings, alphanumericchannel name, bandscope, etc. You can hoose large or small font size in the setting mode. In addition, automatic LCD and keypadbacklighting provides bright illumination for night time operation.
Spectrum activity is displayed on the screen and audio is heard while sweeping the range. It is useful for finding new or interfering signals.
Icom’s original wideband PA circuit and supplied lithium-ion battery pack provides 5W (typ.) output. The supplied BP-217 provides up to 5/4.5 hours* of operating time and greatly reduces both the size and weight needed to obtain full output power.
* VHF/UHF single mode, Tx high: Rx: Stand-by duty ratio= 1: 1: 8
The 4 cursor direction buttons on the keypad gives you quick and intuitive access to many settings. The twin volume/channel knob provides convenient channel/volume setting.
An external DC power jack allows for operation with an external DC power supply (10–16V DC). When used with the CP-19R or OPC-254L, simultaneous operation during charging is possible.
Built-in CTCSS/DTCS encoder and decoder
CTCSS and DTCS tones are used for accessing a repeater or for tone squelch operation. The pocket beep alerts you with a beep sound when the transceiver receives a preset tone.
* Squelch release function to monitor a weak signal.
* Water-resistant construction, equivalent to IPX4
* Auto power save, power off and power on
* 26 memory banks with selected bank and bank link scanning
* 10 channel DTMF memory (16-digit)
* 10dB (approx) built-in attenuator
* Total of 1304 memory channels
* Automatic repeater function*
* Weather channel with weather alert*
(Icom ic-91A dual band handheld transceiver was posted and is owned by: Lenora Berry)
Contact: l_berry@chicagopartsnetwork.com (Lenora Berry) (actual email hidden)
Contact l_berry@chicagopartsnetwork.com (Lenora Berry) for more information.

Flag any violation to moderators committee

Your flagging message:




Icom ic-91A dual band handheld transceiver Icom ic-91A dual band handheld transceiver