|
3/4" square drive with reversable drive pins for 7/32" and 1/4" pin holes, adjustable from 1" to 3-3/4" made from solid steel & black oxide finished. Kits do not include instructions, read and follow equipment manufacturers' instructions for replacing seals. Some kits may include extra parts because they are made to fit the design variations of a particular model. Kits for rod glands with press in metallic bearings (such as bronze) generally will not contain a replacement bearing, however phenolic & plastic bearings are normally included. If a bearing is available separately we will let you know. Because seal designs are continuously improving, and because of possible previous repairs, some kits may have a different seal design than the seal you remove, however, unless the original seal grooves were machined in a previous repair the replacement seals should fit & function properly. Never attempt to service a pressurized cylinder, or a cylinder connected to a load, never use air or hydraulic pressure to disassemble a cylinder. (Heavy duty face pin type spanner wrench 1/2" drive was posted and is owned by: Willie Franco) |
w_franco@chicagopartsnetwork.com (Willie Franco) for more information.
