Chicago Repair and Replacement Parts Network   >   By Location   >   Addison   >   Drill Presses   >   Penetrating crete seal 25 concrete sealer 5 gallons

Penetrating crete seal 25 concrete sealer 5 gallons


Penetrating crete seal 25 concrete sealer 5 gallons
Penetrating Crete Seal 25 is a sprayable non-yellowing pure acrylic concrete sealer designed for decorative concrete such as stamped, overlays, acid stained and exposed aggregate surfaces, as well as brushed or trowel finished concrete surfaces. Low in viscosity, Penetrating Crete Seal 25 penetrates deep into the pores of the concrete for possibly the best protection available.
Combustible liquid (Flash point 105 degrees F). Keep away from open flame and heat. Do not smoke. Avoid direct contact. Skin and eye irritation may occur. Use in well-ventilated area. Inhalation of vapors may cause breathing difficulties. KEEP OUT OF REACH OF CHILDREN. Strongly recommended for exterior use only. First aid is as follows:
Move victim from exposure source. Flush eyes with water for 10-15 minutes.
Remove contaminated clothing. Wash with soap and water. If irritation persists seek medical attention.
Move victim to fresh air immediately. Contact physician if breathing is difficult.
Penetrating Crete Seal 25 brings out the beauty of decorative and aggregate driveways, patios and sidewalks as well as any concrete surface where protection or sealing is needed.
Penetrating Crete Seal 25 offers improved resistance to rain, sun, freezing temperatures, stains, and other pollutants. Applying Penetrating Crete Seal 25 to exposed aggregate will also help eliminate loose pebbles and premature wear.
Penetrating Crete Seal 25 is formulated with highly durable 100% acrylic resins with substrate wetting agents and anti-foaming additives to help ensure excellent adhesion and eliminate bubbles for extended life of the coating.
â–º Penetrating Crete Seal 25 can applied by brush, roller, solvent resistant pump up sprayer, or lambs wool applicator. Apply a standard uniform coat at the rate of 200-300 sq. ft. per gallon depending on the porosity of the concrete surface.
â–º Allow the coating to dry for at least a period of 4-6 hours and then apply a second coat form maximum protection of the concrete surface.
â–º Application equipment may be cleaned using xylene or a laquer type solvent.
http:// /crete_stain_color_chart
(Penetrating crete seal 25 concrete sealer 5 gallons was posted and is owned by: Lakeisha Suarez)
Contact: L-suarez@chicagopartsnetwork.com (Lakeisha Suarez) (actual email hidden)
Contact L-suarez@chicagopartsnetwork.com (Lakeisha Suarez) for more information.

Flag any violation to moderators committee

Your flagging message:




Penetrating crete seal 25 concrete sealer 5 gallons