|
SOKKIA SDR33 DATA COLLECTOR 256 KB MEMORY SDR 33 You are looking at a Sokkia SDR33 Standard data collector with 256 KB memory, which can store approximately 2,100 points which is more than enough for few days of work on a good size jobs, you get all you see in the picture, the data collector comes with All the following: The SDR33 Standard edition has most functions that the Expert version has, the difference between the two versions is very small, and most people would not notice it, this Standard version comes with the following menu functions at the bottom of the screen: (FUNC, SURV, COGO, ROAD) and has the following: under FUNC there is (Job, Instrument, Job Settings, Configure Reading, Tolerances, Units, Communications, Date and time, Job deletion, Calculator, Feature code list, Hardware, Upgrade) under SURV there is (Topography, Resection, Remote Elevation, Keyboard Input) Under COGO there is (Set out coordinates, Set out line, Resection, Inverse, Areas, Intersections, Keyboard input) Under ROAD there is (Cross section survey) Pentax: II/III, PT-10, Topcon: GTS/ET1/ET2, GTS-3, GTS300 (The adaptor cable for the older-model Topcons without RS-232 Serial communications is no longer available from Sokkia. A third-party solution is available but the cost is prohibitive) Nikon: A-series, D-50, (The SDR33 will not work with the older-model DTM-1 and DTM-5 total stations due to them not having RS-232 compliant communications. If your Nikon total station has a 5-pin data-out port, it will not work with the SDR33. If it has a 6-pin data-out port, it should work with the SDR33 and the required adaptor cable available from Sokkia) (Sokkia SDR33 data collector 256 kb 2100 points sdr 33 was posted and is owned by: Pam Russell) |
pamrussell@chicagopartsnetwork.com (Pam Russell) for more information.
