|
Neutral-Crete is also known as the "Neutral Rinse" in the acid staining process. Neutral-Crete is a specially blended pH neutralizer with the intention to prevent adhesion problems when applying concrete sealer over acid. Neutral-Crete neutralizes the remaining acid residue and helps eliminate incompatibility with thesealers. Failure to neutralize acid stains may result in sealer failure (white spots, blistering, premature delamination etc.) By neutralizing the acid stain properly with Neutral-Crete, the sealer topcoat will wet out the surface and bond more efficiently. This will enhance the overall appearance of the acid stained surface and help extend the life of the sealer. One gallon will cover approximately 1,000 square feet (diluted 1:4 with water). â–º Polyethylene or similar plastic sprayers and buckets are recommended for application. Do not use nylon brushes. For safety, always use goggles and protective gloves. â–º Wait until Acid Stain is completely dry and done reacting. â–º Apply Neutral-Crete diluted 1:4 with water by using the polyethylene type pump up sprayer metioned above or by a bucket and mop application. Rinse and mop up to two more times to get most of the residue off. â–º Allow the concrete to dry at least a full 24 hours prior to sealing (concrete must be completely dry). http:// /crete_stain_color_chart (Neutral crete concentrated acid stain neutralizer 1 ga was posted and is owned by: Deidre Fry) |
deidre.fry@chicagopartsnetwork.com (Deidre Fry) for more information.
