MANGO64 STANDARD - ARM11 S3C6410 Embedded Development Kit Need WiFi/Bluetooth/GPS modules? See Mango64 Deluxe Model Default Boot with Android 1.5 from NAND Flash Now Includes SDHC 4GB Card with Linux 2.6.29 Boot Image Q: What O/S(es) does Mango64 support? A: It supports Android 1.5 CupCake (default boot), Linux Kernel 2.6.29 (both via u-boot bootloader), and WinCE 6.0 (EBOOT bootloader). Q: Does the Ethernet interface have a built-in EEPROM for MAC address? A: As there is no EEPROM built-in, CPU/OS needs to pass a MAC to the LAN9220 chipset. Q: What are the board dimensions? A: 16cm x 9.5cm x 3.7cm (6.3" x 3.75" x 1.45"), including LCD panel. Q: Can it be possible to use a rechargable battery? A: A 3.7V 980mAh Li-Ion/Li-Polymer battery can be soldered to Mango64, which features built-in charging circuit. Please note that any defects resulted by any customization works are not covered by warranty. Mango64 = ARM11-based High-Performance Development Kit The Samsung ARM11 S3C6410X is a 16/32-bit RISC microprocessor, which is designed to provide a cost-effective, low-power consumption, high performance Application Processor solution for mobile phones and general applications. Unlike any other competitors, Mango64 supports WiFi/Bluetooth/GPS devices (available at Deluxe model), and comes with a built-in high-resolution (800x480) LCD panel. Mango64 Deluxe Board Hardware Specification: * CPU : Samsung S3C6410X ARM1176JZF-S 667MHz Application Processor * 256Mbytes SLC NAND Flash * 4Mbytes NOR Flash, sectored into 4 separate banks of 1Mbytes memory space can be accessed by S3C6410 * Display : 5 WVGA(800x480) Color TFT with Resistive Touch Screen Interface * Audio : Wolfson WM8960 Audio Codec with 1W Stereo Speaker Amplifier * Ethernet : SMSC LAN9220 10/100Mbps Ethernet Controller * SD/MMC Port 0 : WiFi(Wi2Wi, optional) or Expansion Connector * SD/MMC Port 1 : Standard SD Connector * SD/MMC Port 2 : Expansion Connector * SPI Port 0 : Expansion Connector * SPI Port 1 : Expansion Connector shared with SD/MMC Port 2 * UART Port 0 : GPS(optional) or Expansion Connector * UART Port 1 : Standard DSUB9 * UART Port 2 : Expansion Connector * UART Port 3 : Bluetooth(optional) or Expansion Connector * JTAG : Standard ARM JTAG Interface * WiFi/Bluetooth Combo : Wi2Wi WiFi/BT combo module (not available at Mango64 Standard) * GPS : Partron GPS Module (not available at Mango64 Standard) * 5V/2A AC Adapter Connector * Li-Ion Battery Connector (built-in charger IC for single-cell Li-Ion battery) * Support Interlaced and Non-Interlaced CCIR601/656 Standard Camera Interface * 3-Axis Acceleration Sensor * 2 Indicator LED controllable from GPIO ports * Expansion Connectors : IrDA, Camera, I2S, SPI0/SPI1, SDIO0/2, EBI, UART, LCD * (1) Mango64 Standard Board NEW * (1) SDHC 4GB Card with Linux 2.6.29 Image ported/pre-installed * (1) Resource CD - OS images, Linux kernel source, Datasheets, etc. * (1) AC Adapter - 110V AC input, 5V DC output * (1) 6" USB cable (connA-to-connB) * (1) 6" DB9 serial cable (male-to-female) * (1) 6" Ethernet cross-over LAN cable CAT 5e Mango64 Standard/Deluxe Users Guide: http://www.embeddedsource.net/forum/files/S3C6410/S3C6410_Mango64_Hardware_Manual_0.27.pdf http://www.embeddedsource.net/ http://www.embeddedsource.net/forum (MANGO64 standard :: ARM11 S3C6410 risc embedded dev kit was posted and is owned by: John Woodward) |
John_woodward@chicagopartsnetwork.com (John Woodward)
for more information.