|
THIS IS A PREVIOUSLY USED GAGE BY QUIKCHEK is a highly calibrated artifact using multiple hole patterns calibrated outside of the Coordinate Measuring Machine by conventional methods traceable to N. I. S. T., is certified, and simulates actual parts being inspected with hole locations, true positions, and bolt circle call outs. All Quik Chek's are made of 440c stainless steel hardened to 62 Rockwell C scale, stress relieved and triple stabilized, ground and lapped flat and parallel. Run Quik Chek once a week to assure your CMM is operating properly between the yearly manufacturer calibrations. Check diameter, linear length and squareness X to Y axis then X to Z axis. Measure the 45 length for a volumetric check. Quik Chek is your mechanical assurance that your CMM is within the specified tolerance of the manufacturer. Typical checks take less than 10 minutes - less than 10 minutes for peace of mind. Has previous owner's markings. We are not sure about when the last calibration was done to the inspection tools which we are selling. Be advised that they may or may not need calibrated. $24.95 FIXED S/H WITHIN THE CONTINENTAL 48 STATES. (Glastonbury gage cmm 10" quikchek standard w/ case was posted and is owned by: Lina Justice) |
LJustice@chicagopartsnetwork.com (Lina Justice) for more information.
