|
1 x IC Chip TA8264AHQ, Audio Power Amplifier DIP 16pin - The TA8264AHQ is 4 ch BTL audio power amplifier for car audio application, TOSHIBA - This IC can generate more high power: POUTMAX = 41 W as it is included the pure complementary PNP and NPN transistor output stage. - It is designed low distortion ratio for 4 ch BTL audio power amplifier, built-in stand-by function, muting function, and diagnosis circuit which can detect output to VCC/GND short and over voltage input mode. - Additionally, the AUX amplifier and various kind of protector for car audio use are built-in. - High power : POUTMAX (1) = 41 W (typ.) (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 OHM) : POUTMAX (2) = 37 W (typ.)(VCC = 13.7 V, f = 1 kHz, JEITA max, RL = 4 OHM) : POUT (1) = 24 W (typ.)(VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 OHM) : POUT (2) = 21 W (typ.)(VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 OHM) - Built-in diagnosis circuit (pin 25) - Low distortion ratio: THD = 0.02% (typ.)(VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 ?) - Low noise: VNO = 0.18 mVrms (typ.)(VCC = 13.2 V, Rg = 0 OHM, GV = 34dB, BW = 20 Hz~20 kHz) - Built-in stand-by switch function (pin 4) - Built-in muting function (pin 22) - Built-in AUX amplifier from single input to 2 channels output (pin 16) - Built-in various protection circuit: Thermal shut down, over voltage, out to GND, out to VCC, out to out short, speaker burned - Operating supply voltage: VCC (opr) = 9~18 V (1 x ic chip TA8264AHQ, audio power amplifier dip 16PIN was posted and is owned by: Renee Cabrera) |
ReneeCabrera@chicagopartsnetwork.com (Renee Cabrera) for more information.
