AVR JTAG & STK500 2 IN1 V5.0 USB &SERIAL PORT Emulator The AVR JTAG STK500 2 In 1 Emulator is designed to be used with ATMEL AVR JTAG emulation and AVR STK500 programme. The emulator itself has both a USB & SERIAL interface. It is fully plug and play compatible. The AVR JTAG STK500 V5.0 USB&SERIAL PORT Emulator is designed to operate with AVR Studio debug tool and is compatible with Windows 98 / 2000 / XP. For Full feature about AVR JTAP and STK500, see from ATMEL official website. * Fully plug and play compatible. * Supports USB1.2 (12Mb/s) and USB 2.0 (480Mb/s, full speed). * Advanced emulation controller provides high performance. l USB 2.0 (bus-powered) peripheral l Advanced emulation controller provides high performance l Supports ATmega16/162/164/165/169,ATmega32/324/325/3250/329/3290, ATmega406,ATmega64/640/644/645/649/6490,ATmega128/1280/1281 ,ATmega256/2560/2561,AT90CAN128 AND LATEST AVR CHIPS l Completely compatible with STK500 from ATMEL (2 times fast than AVRISP,10 times fast than parallar port ISP,also supports AT86RF401/AT89S51/AT89S52). l Installs without opening the computer case or turn off the host computer l Simple connection with host, Plug-and-Play compatible (no jumpers, no switch settings) n Completely Compatible with AVR JTAP EMULATOR n Operates with AVR Studio software. n Compatible with Windows 98 / 2000 / XP n 1* AVR JTAG & STK500 2 IN1 V5.0 n 3* Connecting Target boad cables (Avr jtag STK500 2 in 1 usb emulator programmer was posted and is owned by: Chester Meyer) |
CMeyer@chicagopartsnetwork.com (Chester Meyer)
for more information.