|
I am selling this Delta drill press because of downsizing. I have owned the press for at least 15 years and haven't had one problem with it. The manual feed wheel has a missing knob....should be easy to replace. Specifications: 1/2 chuck with chuck key and taper driver pin to remove chuck assy. , 5 speed, 120 volt, height capacity from 36 inches to approximately 2 inches off floor, spindle stroke is 5 1/2, has light, weight would be between 200 and 300 #, table diameter 16 in., motor hp would be at least 1/2 hp...information on data place cannot be deciphered. The 16 in table swings out of the way for drilling large items and also raises and lowers by the geared crank shown on the pictures. You would be happy with this drill press. (Drill press, 1/2 chuck, 5 1/2 stroke, 1/2 hp approx was posted and is owned by: Ethel Bradford) |
ethelbradford@chicagopartsnetwork.com (Ethel Bradford) for more information.
