This listing is for a Pro Shot L6 Laser System. This is a used item, but it is in excellent condition. It comes with the optional remote, mounting bracket and 2 red targets, all in the original black hard case. This item has just been picked-up from the original selling dealer, where it has been checked, and calibrated. See photo of certificate. The L6 is delivers a highly visible rotating beam and plumb spot for suspended ceilings, walls, soffits, and layout work. It provides servo motor automatic horizontal leveling and vertical plumb. The variable speed rotating beam can also be stopped or set to scan in a selectable arc of 0-90 degrees. The optional remote control allows control of rotation and scan modes, and alignment in the vertical mode up to 100 feet from the laser. You can also manually tilt the rotating plane in one or both axis to match existing heights. Visible Range: 100' radius (30M) typical depending on ambient lighting Range with Optional R5e Receiver: 500' radius / 1000' diameter (152m/304m) Rotational Coverage 360 degrees Horizontal & Vertical Accuracy: ±3/32 inch per 100 feet (2.4mm per 30m). Leveling Method: Electronic servo motor Rotating Beam Power: 635nm 2.2mW (nominal) class IIIa Rotation speed Variable 0-500 rpm Scan Mode in variable arc of 0-90 degrees. Power: 65 hours on 2 D alkaline batteries. 50 hours with optional NiMH rechargeable batteries Environmental: Water & dust resistant Safety: CDRH Class IIIa, IEC Class 3r Operating Temperature: 14°f to 122°f (-10°c to 50°c) Storage Temperature: -40°f to 140°f (-40°c to 60°c) (Pro shot L6 laser system, excellent condition was posted and is owned by: Mable Vinson) |
M.vinson@chicagopartsnetwork.com (Mable Vinson)
for more information.