Entegris Millipore ChemLine CL II QC ATX Process Filter Use the links below to View More Images of the Millipore ChemLine II ATX 10" Filter Entegris Millipore ATX ChemLine II 10" Filter - Side View Entegris Millipore ATX ChemLine II 10" Filter - Side View Close Up Entegris Millipore ATX ChemLine II 10" Filter - End View Entegris Millipore ATX ChemLine II 10" Filter - Opposite End View Millipore Chem-Line 2 ATX Filter 2um Pore Size The Solution for Aqueous-based Chemical Processes : QuickChange ATX Disposable filters, designed for use in any prewetting procedures. Without an IPA prewetting requirement, QuickChange Disposable filters prevent alcohol/chemical interaction, avoid potential sources of contamination, and eliminate the cost and inconvenience of hazardous waste disposal. QuickChange Disposable filters reduce filter changeout time, * Filter Differential:7.5 PSI MAX. @180c 60 PSI MAX. @ 25c * Ordering Description: QC ATX CL II 0.2um 10" 3/4" Flare * Non-dewetting PTFE membrane filter pre-wet and packaged in high-purity DI water * Eliminates prewetting and flushing cycles. Eliminates chemical usage while reducing system downtime during filter changeouts. Saves time, greatly increases equipment uptime Design incorporates no O-rings to avoid potential sources of contamination. * Available in retention ratings of Provides excellent small particle retention for a variety of particle sizes. Requires less space for changeout. Minimizes downtime Rapidly reduces particle counts. Decreases system qualification time. Improves process parameters. note all text and photos copyright 2009 (Entegris millipore chemline cl ii qc atx process filter was posted and is owned by: Guy Mccarty) |
g.mccarty@chicagopartsnetwork.com (Guy Mccarty)
for more information.