|
DL Equipment Provides Quality Used And New Equipment, Machinery And Attachments For All Makes And Models. This listing is for a pair of new rubber tracks for a X331 or X334 Bobcat. We Also Have Tracks For Other Brand Excavators And Skid steer Loaders. Phone: 806.885.1128 Email: V.Jacobson@chicagopartsnetwork.com We dont have tracks for Cat or ASV skid steers. ORG Large Listing Raedy No Name Read this and you see how much better our tracks are. Most rubber tracks have a steel belt much like a car tire. The belt is made of individual steel cords wrapped around the track and then vulcanized inside the track. Most manufactures overlap the individual cords which creates an inherently "weak" area in the track. Our Tracks are one of the few manufactured with CWT. This means a single cord is wrapped again and again around the track creating the steel belt with just one cord of steel. The benefit is "NO WEAK POINT IN THE TRACK." Most Of Our Tracks Also Are The "Half Pitch Tracks." Half Pitch Tracks means that there are twice as many lugs in the track as a Full Pitch track. This means that every sprocket tooth "grabs" a lug instead of every other with Full Pitch track. This also means a smoother ride. We sell Tracks for most brands of Skidsteers and Mini Excavators. We also carry steel tracks and parts. If we don't have listed what you need, contact us and we will set you up with what you need. If you can't find a track size stamped into the track, you can take three simple measurements that will determine which track you need. 1. Measure the width of the track (in millimeters). 2. Measure the distance from the center of one link to the center of the next link (in millimeters). This is also commonly known as the pitch of the track. 3. Count the number of links, or lugs all the way around the track. The measurement is read Width x Pitch x Links. (Excavator rubber tracks, bobcat, takeuchi, hitachi... was posted and is owned by: Vivian Jacobson) |
V.Jacobson@chicagopartsnetwork.com (Vivian Jacobson) for more information.
