II Series - Filter Cartridge Proprietary Filter Media Produced Directly by Pall for Highly Consistent Performance High Contaminant Holding Capacity Rigid Polypropylene Outer Cage Protects Filter Submicron Prefilter for Final Membrane Application Asymmetric Polysulfone Media Used in 0.2 m Grade Fast Rinse-Up to 18 Megohm-cm Maximum Forward Differential Pressure: 75 psid (5.1 bard) @ 68 F (20 C) 40 psid (2.8 bard) @ 150 F (65 C) Recommended Change Out Differential Pressure Manufactured from materials, which are FDA listed for food contact applications in Title 21 of the U.S. All polypropylene components meet the specifications for biological safety as per the USP for Class VI-121 C plastics (gaskets/O-rings excluded). Rinse-up to 18 Megohm-cm with a minimum of throughput. Cartridges are free of resins, binders, and adhesives. Multiple autoclaving for 30 minutes at 250 F (121 C) under no end load conditions. In-line steam sterilization is not recommended. May be in-line sanitized with hot water at 180 F (82 C) for 1 hour. PFT 0.2: Highly Asymmetric Polysulfone Support Material: Polypropylene Gaskets/O-rings: Silicone Elastomer, Nitrile, EPDM, Fluorocarbon Elastomer, White Nitrile, White Silicone, Expanded PTFE, FEP Encapsulated Silicone, High Purity Fluorocarbon Elastomer, FEP Encapsulated Fluorocarbon Elastomer, Kalrez 20" (50.8 cm), 29 1 4" (74.3 cm) (Filterite 20" water filter cartridge pft 0.2-20US-M8 was posted and is owned by: Valeria Pittman) |
Valeriapittman@chicagopartsnetwork.com (Valeria Pittman)
for more information.