|
LOADING CHUTE FOR YOUR LIVESTOCK Need help loading your goats, cows, pigs, etc. ? Here's a good used loading chute that I don't need. Side posts are 3 x 1.5 x .25 inch thick channel iron. Side rails are 1 inch heavy wall round pipe. Floor support is a combination of 2.5 and 2.0 inch by .25 inch angle iron and 3.0 inch channel by .25 inch thick. Support stands are a combination of 1 and 5/8" diameter. The other is 1.75 inch round pipe with welded feet on both for support pads. Side wood is 1.5 inch dressed "2 by lumber" painted black. Flooring is 1.5 inches thick (treated wood, I think) plus 1 inch sawmill cedar lumber, practically new. Tires are 15 inches. I measured the rims with a tape measure. Tires are not really very good at all. They do hold air but one has a slow leak. The hitch is 2 flat plates pin type, approx. hole size is .75 inch. As you can see from the photos, the support for all of it appears to be the rear end out of an automobile. Thanks. All sales final. Can send plenty of photos. (Loading chute for livestock was posted and is owned by: Jana Stafford) |
Jana.Stafford@chicagopartsnetwork.com (Jana Stafford) for more information.
