This is an approx.20 y.o. Drill setup.It has drilled only 3 wells ,one of appx 200' and two of appx 100'.just before these Pics were taken I ran the drill for about 30 min just to run out the fuel.There are 20 sections of drill pipe which will take you down to about 100' included are an additional 5' diamond tipped rock bit which will take you through some types of bed rock,one standard drill bit an accessory bit and a reamer for boring out the hole for the casing, after the initial hole is drilled .there is a drill swivel pictured with a small green hose attached and this allows water to be pumped down through the hollow drill pipes. While you are drilling the cuttings are washed back out of the hole .
There is really nothing else needed except perhaps a pipe dog to hold the pipe as you are removing it after drilling but you can use two pipe wrenches to do this also.
(Deeprock hydra drill 200 water well drilling rig was posted and is owned by: Wallace Newman)
firstname.lastname@example.org (Wallace Newman)for more information.